How To Fix Shower Diverter Pull-Up Moen. Once you can see the screw continue and unscrew. Unscrew the stem from the diverter valve's retaining nut with your hand and clean sediment buildup from the diverter valve parts by dipping them in vinegar to loosen the buildup, then brushing with a wire brush.
Pull the diverter knob up and down a few times to loosen it. Seal off your drain with tape so that small screws or other important parts are not lost down the drainpipe. Restore your bathroom tub and shower tub spout with the danco tub spout diverter repair kit for moen.
Table of Contents
How To Determine That Your Shower Diverter.
You can use two different options to fix this. Any kind of cooking spray can lubricate it before the main task begins. Once you can see the screw continue and unscrew.
Slide The Washer (#3) Into The Front Of The Diverter Gate (#4) With The Flat Part Of The Washer (#3) Facing Outward.
Put in some cooking spray on the knob to lubricate it. Find a baggy that the faucet fully fits in and fill it with distilled white vinegar, you should let it soak for about 24 hours. Unscrew and remove the handle, then pull out the stem extension with pliers and remove the escutcheon and the wall tube to expose the diverter bonnet.
How Do You Clean A Shower Diverter Pull Up?
How to fix a shower diverter pull up. Wipe away any excess spray and wash the oil off the bathtub. Apply some cooking spray to lubricate the knob.
Use A Cooking Spray To Loosen The Diverter.
Reinstall it back on the faucet! Turn off the water supply to your shower. Each has its own use.
Seal Off Your Drain With Tape So That Small Screws Or Other Important Parts Are Not Lost Down The Drainpipe.
Slide the lift rod (#1) through the hole in the top of the spout (#2). Before commencing a diverter repair, turn the water off and allow any excess moisture to drain away. The diverter in a shower diverts water away from the faucet and up towards the head.